.. __board_Assembly:

Board_Assembly
====================

ESP32 DEVKIT_V1 Board
-------------------------------

Please pay attention to the position of the antenna and ensure that the ESP32 DEVKT V1 / ESP32_S3 is correctly inserted onto the base board

   .. image:: /Tutorial/img/安装对比1.jpg
ESP32 DEVKIT_V1 Board / ESP32_S3 is not on the packaging list
   .. image:: /Tutorial/img/32主控.jpg
   
 *ESP32 DEVKIT V1 Board after Assembly*

Note: The S terminal of the breakout board directly connects to the pins of the ESP32 DEVKI TV1 board.

ESP32_S3 Board
------------------------------- 

   .. image:: /Tutorial/img/S3主控.jpg
   
   *ESP32_S3 Board after Assembly*

Note: The S terminal of the breakout board directly connects to the  pins of the ESP32_S3 board.

POWER
-------------------------------

ESP32 DEVKIT_V1 and ESP32_S3 needs 5v power supply. In this tutorial, we need connect ESP32 to computer via USB cable to power it and program it. However, during the operation of the breakout board, we strongly recommend powering it with an external power supply.

   .. image:: /Tutorial/img/32供电.png

   .. image:: /Tutorial/img/S3供电.jpg

   .. image:: /Tutorial/img/推荐外部电源.jpg

   .. image:: /Tutorial/img/供电.jpg